Summer months we recommend 3-5 days
Winter months 5-10 days

Prep is done on the outside(cutting patterns)
The tint is installed on the inside of the window.

No. The tint we apply is not re usable. It can be removed easily with a steamer but once removed it cannot be re used.

We recommend waiting the advised drying time before taking your vehicle to be washed. Doing so before hand will pro long the drying time of the film giving more chance of peeling when putting window down.

The moisture that remains between the film and the glass after installation can cause a hazy, streaky, blotchy appearance. It takes several days for the adhesive/film to completely cure. The remaining moisture will evaporate through the film; depending on the type of film, this process may take a couple of days, or even a couple of months. When the water evaporates completely, your windows should have excellent clarity.

After window film installation, wait a week before cleaning the inside of the window where the film was installed. After a week, use a window cleaner without ammonia and a soft cloth or rubber squeegee. We recommend foam cleaners because they do not streak, and are usually ammonia-free. Never scrape the film with any type of blade or clean your tinted windows with anything abrasive, as it will scratch the film.

The amount of time varies, depending on your type of vehicle. A complete car/4×4 can take 2 to 4 hours. Residential or Commercial will depend on size of windows and how many Ect.

Anything from the B Pillar Back can be as dark as you like. Front windows must let through
70% of light and front windscreens 75%.